The Dirt King fabricated lift spindles raise the front end a true 3.5" without compromising the ride quality. These spindles are currently the only lift spindles available for the 2004-2008 F-150’s that accept both factory or aftermarket upper and lower control arms. The spindles are the CAD designed and constructed from 1/4" thick steel plate. Included with the spindles is all necessary mounting hardware and detailed installation instructions.
Fabricated lift spindles
Extended DOT approved brake lines
Brake line mounting brackets
Grade 10.9 caliper mounting bolts
Upper control arm washers
Track Width The Dirt King lift spindles increase the track width 1.75” per side. Due to the increased width wider fiberglass fenders may need to be installed.
Installation The installation of this product requires the use of factory hub snouts. They will need to be pressed out of the factory spindles and pressed into the new Dirt King lift spindles. Tire Info If installing 35” tires modifications to the wheel wells and bumper may need to be made for proper tire clearance.
Compatibility: 2004-2008 Ford F-150 2WD